specifications

Data sheet                

  • Printing technology : Fused filament fabrication (FFF)

  • Print volume: 4 x 4 x 3 in

  • Print resolution : 100 up to 300 microns

  • Print speed: 30 mm/s to 50 mm/s

  • Physical dimensions : 11.25 in x 7.75 in x 13.5 in

  • Gross weight : 6.07lbs

  • Nozzle diameter : 0.4 mm

  • Connectivity : USB

  • Third party open source slicing software : Cura / Kiri Moto

  • Third party open source firmware : Marlin

  • OS compatibility : Windows and Mac (however our videos were only produced for windows users)

  • File type : STL, OBJ, Gcode

General information

  • In a classroom, students can draw and print one part per week, once completed they assemble the printer

  • In a Maker space, students are free to draw, print and assemble as they wish

    • Printing time is subject to your slicing settings and is estimated around 72 hours

    • Estimate 6 hours of assembly and 6 hours of start-up per printer

  • The amount of filament (PLA/PHA) required to print one (1) ULIO is subject to your slicing settings and is estimated to be 1082 gr.

    • It's good practice to estimate about 15% more (1250 gr.)

  • ULIO will not have the same precision of a conventional 3D printer

  • Adult supervision and assistance is required

     

Requirements of your existing 3D printer  

  • You need an existing 3D printer with a minimum print volume of 200 mm x 160 mm x 200 mm (8 x 6.2 x 8 in)

  • So far ULIO has been successfully printed on:

    • Robo R2

    • Lulzbot Taz6

    • Prusa I3 Mk2s

    • Prusa I3 clone

    • Tinkerine

    • Makergear M2

Bill of material inside our kit

  • One (1) authentic micro controller - USA

    • Includes all of the required wiring and connectors

    • Includes three (3) mechanical endstops

  • One (1) authentic hot end - England

    • Bowden type: 1.75 mm at 0.4 mm

    • Includes all the required parts for the hot end assembly

  • Four (4) stepper motors (High quality Nema 17)

    • Includes four (4) wires and connectors

  • Two (2) side cooling fans including the wiring assembly

    • Includes the wiring and connectors

  • One (1) poly carbonate print platform

  • One (1) Buildtak print sheet

  • One (1) Desktop power supply

    • Certified (cULus )

  • Wiring assembly

    • All of the wire terminals are crimped with quick connects (no soldering is required)

  • All of the required hardware to assemble ULIO

  • All of the required fasteners to assemble ULIO

  • One (1) USB panel mount

  • One (1) USB cable

  • One (1) sandpaper sheet

  • One (1) 5 mm drill bit

  • One (1) metric screw drivers set

Tools

Browser requirement

Member Login
Welcome, (First Name)!

Log In
Enter Member Area